Polymer Systems
Technology Limited

Advanced Engineering



Fast-Cure White Silicone Adhesive

  • Two-part, white, thixotropic, high tear strength silicone system
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Primer is not required for many bonding applications
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A: Part B)
  • For bonding and sealing silicones to each other and other substrates such as metals and plastics
  • Suitable for fast-paced production or prototyping due to its rapid cure rate
Typical PropertiesAverage Result
Viscosity, Part A80,000 cP (80,000 mPas)
Work Time2 hours
Cured: 24 hours minimum at ambient temperature and humidity
Specific Gravity1.12
Durometer, Type A20
Tensile Strength1,000 psi (6.9 MPa)
Tear Strength135 ppi (23.8 kN/m)

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.


50 mL SxS Kit
200 mL SxS Kit
400 mL SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)


12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet


Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone