Polymer Systems
Technology Limited

Life Science

Implant Line

MED-6233

Low Consistency Elastomers

Optically Clear Low Consistency Silicone Elastomer

DESCRIPTION
  • Pourable, optically clear, two-part silicone elastomer
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTransparent
Viscosity, Part A88,000 cP (88,000 mPas)
Viscosity, Part B59,000 cP (59,000 mPas)
Refractive Index, Part A1.41
Refractive Index, Part B1.41
Work Time52 hours
Cured: 30 minutes at 150°C (302°F)
Specific Gravity1.04
Durometer, Type A50
Tensile Strength740 psi (5.1 MPa)
Elongation380%
Tear Strength80 ppi (14.1 kN/m)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 mL Side-by-Side Kit
400 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging
For Use With Low Viscosity Elastomers Medical Implants:

Biomaterials

Medical Silicones
Medical Silicones for Healthcare

SpeedMixers™

Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System

Marking Inks

Inks
Inks

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing