Polymer Systems
Technology Limited
Life Science
Implant Line
MED6-6606
Dispersions
RTV Silicone Dispersion
DESCRIPTION
- One part, RTV silicone dispersion
- Cures at room temperature upon exposure to atmospheric moisture
APPLICATION
- Suitable for dip casting and heat-curing of thin elastomeric films
- For use as an adhesive for bonding and sealing silicone together
- Low viscosity makes dispersions ideal for use as sprayable coatings
- Provides good adhesion to metals and other substrates
- Designed for dipping or wiping
Important document: 
PDF Guide to Silicone Dispersions
| Typical Properties | Average Result |
| Uncured: | |
| Appearance | Translucent |
| Non-Volatile Content | 30% |
| Viscosity | 95 cP (95 mPas) |
| Cured: 72 hours minimum at ambient temperature and humidity | |
| Specific Gravity | 1.11 |
| Durometer, Type A | 20 |
| Tensile Strength | 1,190 psi (8.3 MPa) |
| Elongation | 800% |
| Tear Strength | 115 ppi (20.3 kN/m) |
| Tissue Culture (Cytotoxicity Testing) | Pass |
| Elemental Analysis of Trace Metals | Pass |
The properties listed above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Recommended Primer MED-160
Note: Some bonding applications may require the use of a primer.
Packaging
1 Pint (455 g)
1 Gallon (2.88 kg)
5 Gallon (15.6 kg)
Warranty
12 Months
Product Profile
Material Safety Data Sheet EU EN
For Use With Foam Medical Implants:
Biomaterials
Medical Silicones for Healthcare
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Semco
Semco Products PDF Catalogue
SpeedMixers™
Laboratory Vacuum Mixer System
Biomaterials
Tubing
Semco
SpeedMixers™