Polymer Systems
Technology Limited

Advanced Engineering

Commercial Aviation:

R-2200-11

Molding Elastomer

Gray Silicone Mold-Making Rubber

DESCRIPTION
  • Two-part, pourable silicone with outstanding release properties
  • Heat accelerated cure
  • High hardness, low shrinkage, and good dimensional stability
APPLICATION
  • Use in the injection and transfer molding of silicone parts
  • Flexible potting, encapsulating and mold-making material
  • Suited for prototype design and production tooling
PROPERTIES
Typical PropertiesAverage ResultMetric Conv.
Uncured:
Appearance, Part AGray-
Appearance, Part BTranslucent-
Viscosity, Part A150,000 cP150,000 mPas
Viscosity, Part B3,600 cP3,600 mPas
Work Time2.5 hours-
Cured: 30 minutes ar 150°C (302°F)
Specific Gravity1.24-
Durometer, Type A60-
Tensile Strength800 psi5.5 MPa
Elongation155%-
Tear Strength90 ppi15.9 kN/m
Stress at 100% Strain800 psi5.5 MPa

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)

Warranty

6 Months

Product Profile - Full Details Product Profile

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone