For applications requiring low outgassing and minimal volatile condensibles under extreme operating conditions to avoid condensation in sensitive devices
As a sealing, caulking, adhesive or potting material in electronic and space applications where high vacuum environments are encountered
As a diluent for reducing the viscosity of other tin condensation controlled volatility silicones because of its low viscosity
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Transparent
Viscosity, Base
5,000 cP (5,000 mPas)
Work Time
6.5 hours
Cured: 7 days minimum at ambient temp. and humidity
Specific Gravity
1.01
Durometer, Type A
21
Tensile Strength
80 psi (0.55 MPa)
Elongation
150%
Collected Volatile Condensable Material (CVCM)
0.03%
Total Mass Loss (TML)
0.55%
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
